phone: 888-310-0284
2 of 2 Items
2 of 2 Items

An AR capable of reaching 1,000 meters or more.

The AR-10 and LR-308 helped make the AR platform a proper bench rifle, but the .308 Winchester load chambered in those guns can only do so much. For serious shooters who want to remove all limiting factors from their rifle and ring steel at record-setting distances, a 6.5 Creedmoor AR is the one to build. Our Creedmoor kits are carefully configured to afford any shooter just that: Reliable accuracy beyond what the AR could ever do before.

What is 6.5 Creedmoor?

The Creedmoor cartridge is a high-performance round designed specifically to fit in semiautomatic short-action rifles -- specifically, the .308 AR platform. Although it provides virtually twice the accuracy as .308 Winchester up to 1,000 meters, it still utilizes most .308 parts. That includes the upper and lower receivers, lower parts kit, buffer system and buttstock, and handguards. Only the bolt, extractor, and barrel are different between the two cartridges.

Want to know more ?Read our guide comparing .308 and 6.5 Creedmoor.

Why our 6.5 Creedmoor AR Kits

  • All carbon barrels forged from MIL-B-11595 E steel (4150 or CMV/Chromoly Vanadium)
  • All carbon barrels and chambers treated with Nitride (Melonite) or Phosphate coating
  • All stainless / match barrels forged from Crucible 416R steel for sub-MOA accuracy
  • All bolt carrier groups (BCGs) full-auto, staked, M16 profile, chrome-lined
  • All stripped upper receivers forged from mil-spec 7075 T6 aluminum
  • All buffer assemblies and lower parts kits are mil-spec in fit and finish

Completing Your Creedmoor Rifle Build

Our Creedmoor kits include all the parts necessary to assemble your new rifle, except for the firearm component of the AR platform: The stripped lower receiver. You have two choices in obtaining a stripped lower to assembly your rifle. You may purchase a stripped receiver from an FFL, or you can fabricate a .308 80% lower (available here) with a .308 jig. 

State Laws May Vary

Contrary to federal law, some states have either restricted or banned the sale, transfer, and ownership of 80% lowers, firearm blanks, and other gun parts. Because of these restrictions, we cannot ship our products to certain states. Please confirm whether your state is restricted on our Shipping & Return Policy before placing an order. We cannot fulfill orders to restricted states if placed.


DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, Hawaii, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.