phone: 888-310-0284
7 of 7 Items
  • Tactical Charging Handle for AR-10 / LR-308 .308 Tactical Charging Handle for AR-10 / LR-308 .308 Tactical Charging Handle for AR-10 / LR-308 .308

    Tactical Charging Handle for AR-10 / LR-308 .308

    It's simple: you need a charging handle to put your .308 sized AR rifle into battery, whether it's an AR-10 (Colt's proprietary design) or LR-308 (the other 90% of all .308 sized AR rifles out there). Here's one. This is a standard .308 sized charging...

  • CMMG Charging Handle Assembly - AR15

    CMMG Charging Handle Assembly - AR15

    Get yourself a charging handle that won't twist or break so easily under force. The CMMG Charging Handle Assembly is a standard AR-15 handle that is made from a durable 7075-T6 aluminum to ensure longevity with latch installed. Features Made from...

  • Luth AR Charging Handle - .308

    Luth AR Charging Handle - .308

    The standard .308 from Luth-AR. Made from the lightweight yet durable 6061-T6 aluminum and anodized black, not just for looks, but for protection against corrosion. Perfect for you .308 rifle! Features 6061-T6 Aluminum Anodized Black Compatible with ...

  • Sig Sauer® Tread 400 Ambidextrous Charging Handle

    Sig Sauer® Tread 400 Ambidextrous Charging Handle

    Whether your left or right handed, or both, this is the perfect charging handle for builders and shooters like you. The Sig Sauer Tread 400 Ambidextrous Charging Handle was designed with medium sized latches and dual pins and its longevity is guaranteed...

7 of 7 Items

Mil-spec and oversized charging handles for quick reloads.

The humble charging handle is often one of the most overlooked components on the average AR. But once you slap that shiny new red dot atop your receiver's rail, you might find it's a bit of a pain trying to pull the handle. And if you're a leftie, or you're running n' gunning in a competition, you'll quickly realize that tiny little finger ledge just doesn't cut it. Why not upgrade? It takes a few seconds to swap your handle and it's cheap.

AR-15 Charging Handles, Made From Quality Billet

You'll find no rough edges or burrs digging into your digits (or scuffing up your receiver or buffer tube). All charging handles we sell are crafted on CNC from quality billet (6061-T6) aluminum, before getting the traditional Hardcoat anodized finish to match your AR's coatings. 

Compatible with All AR Upper Receivers

All charge handles we offer are made to fit any 5.56/.223 upper receiver, and .308 / AR-10 receivers. Each handle is drilled to accept the typical gas key, no matter the caliber in question. All AR-15 handles cover 5.56, .223, 300 BLK, 9mm, 6.5 Grendel, and others, while the LR-308 / AR-10 handle covers all calibers chambered for that larger platform.

Try an Oversized Latch for Faster Reloads

Never mind those $80+ charging handles from the "Gucci" brands. We kept things simple while providing the same upgraded functionality with our oversized option. The larger handle latch features a cross-pattern and is constructed from quality steel for toughness, while the rest of the handle is made from billet aluminum for weight and corrosion wear.

DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At GunBuilders.com, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, Hawaii, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.