Polymer80 Pistol Jigs are back. Grab yours now.
If you're ready to build a GLOCK® 80% pistol using a P80 frame, then you need a GLOCK® Compatible 80% Frame Jig. Each Polymer80 jig is designed to work with a specific, corresponding Polymer80 pistol frame. See compatibility below to determine which jig you need for your frame's model.
You'll Need These Tools, Too
The Polymer80 Frame Jig includes the bits required for drilling your parts kit's pin holes. However, you will need basic hand tools (sold separately) to finish the slide section of the frame, before you can install your barrel, slide, and other parts.
Polymer80 frames are sold separately. We do not carry Polymer80 pistol frames. Your frame must be sourced elsewhere.
Contrary to federal law, some states have either restricted or banned the sale, transfer, and ownership of 80% lowers, firearm blanks, and other gun parts. Because of these restrictions, we cannot ship our products to certain states. Please confirm whether your state is restricted on our Shipping & Return Policy before placing an order. We cannot fulfill orders to restricted states if placed.
Now get to buildin'.
DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At GunBuilders.com, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Gun Builders Depot, a/k/a GunBuilders.com nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, Hawaii, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.