Complete Slide Kit - LFA Elite RMR Optic Cut Glock® 17 Compatible Slide - FDE Cerakote

Forged G17 Slide Kit Finished in FDE, Vented, and Ready for a Red Dot

Trade your factory G17 slide for something lighter and optic-ready in Flat Dark Earth, all in one order. This kit bundles the forged LF17 Elite slide with your choice of barrel and a complete upper parts kit, leaving just sights (or your red dot) to finish the job.

The forged 416R stainless slide is precision-machined to factory internal dimensions with an RMR optic cut, opening up compatibility with a wide range of red dots. Front and rear serrations make handling and racking easier, and the matte FDE Cerakote finish holds up to fouling, wear, and corrosion over heavy use. Choose a non-threaded barrel for a standard build, or go threaded with a thread protector included if a suppressor or muzzle device is down the line — both are 416R stainless with a Black Nitride finish and 1:10 twist.

What's Included:

Slide

Step up from a standard OEM-spec slide with this forged 416R stainless slide, built for builders who want a lighter, faster-cycling upper without sacrificing durability. The forged construction shaves weight while keeping the slide tough enough to handle heavy round counts.

• Caliber: 9mm
• Compatibility: GLOCK® 17 Gen 1-3
• Fit: Factory GLOCK® 17 Internal Dimensions
• Material: 416R Stainless Steel, Forged & Heat Treated 38–42 HRC
• Finish: Elite Series FDE Cerakote
• Serrations: Angled Front and Rear
• Sight Cut: Standard Dovetail
• Optic Cut: RMR pattern
• 100% Made in the USA

Barrel:

Choose a non-threaded barrel for a standard build, or go threaded with a thread protector if you plan to add a muzzle device or suppressor down the road. Barrels are 416R stainless with a Black Nitride finish and a 1:10 twist rate, built for consistent accuracy shot after shot.

• Caliber: 9mm
• Material: 416R Stainless
• Finish: Black Nitride
• Twist Rate: 1:10
• Choose your barrel: Non-Threaded or Threaded w/ Thread Protector

Slide Parts Kit Includes:

The included upper parts kit has everything needed to complete slide assembly: firing pin and spring, firing pin safety and spring, extractor and depressor plunger with spring, channel liner, spacer sleeve, steel cover plate, and a polymer guide rod assembly (rod, washer, screw, spring).

• Firing pin
• Firing pin spring
• Firing pin spring cup
• Firing pin safety
• Firing pin safety spring
• 9mm Extractor
• Extractor depressor plunger
• Extractor depressor plunger spring
• Channel liner
• Spacer Sleeve
• Steel cover plate
• Polymer guide rod (guide rod, washer, screw)
• Guide rod spring

Slide Kit Instructions

Assembling your custom GLOCK® slide takes 15 to 30 minutes, and requires a few basic tools:

• Channel Liner Tool
• Small Punch Set
• Gunsmith Hammer

Need help? Use our instructional guide to put your slide together!

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Gun Builders Depot, a/k/a GunBuilders.com nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com