Full-Size Optic-Ready Slide Kit Finished in FDE, Barrel and Internals Included
Give your G17-pattern build a Flat Dark Earth finish and optic readiness in one order. This kit pairs a Trijicon RMR-cut, FDE Cerakote slide with your choice of barrel and a full upper parts kit, so all that's left is sights or your red dot of choice.
Machined from 416R stainless to GLOCK® OEM specs, the slide's angled front and rear serrations give you a better grip for handling and racking, whether or not you've got an optic mounted. Choose a non-threaded barrel for a standard setup, or thread it with a protector included if a suppressor or muzzle device is down the line — both are 416R stainless with a Black Nitride finish and a 1:10 twist for consistent accuracy.
What's Included:
Slide
The slide is machined from 416R stainless to factory internal dimensions and sight cuts, then finished in durable Black Cerakote for scratch, rust, and corrosion resistance. Angled front rear serrations give you a secure grip for chambering and press-checks.
- Caliber: 9mm
- Compatibility: GLOCK® 17 Gen 1-3
- Fit: Factory GLOCK® 17 Internal Dimensions
- Material: 416R Stainless Steel, Heat Treated 42–44 HRC
- Finish: Elite Series FDE Cerakote
- Serrations: Angled Front and Rear
- Sight Cut: Standard Dovetail
- Optic Cut: RMR pattern
- 100% Made in the USA
Barrel:
Choose a non-threaded barrel for a standard build, or go threaded with a thread protector if you plan to add a muzzle device or suppressor down the road. Barrels are 416R stainless with a Black Nitride finish and a 1:10 twist rate, built for consistent accuracy shot after shot.
- Caliber: 9mm
- Material: 416R Stainless
- Finish: Black Nitride
- Twist Rate: 1:10
- Choose your barrel: Non-Threaded or Threaded w/ Thread Protector
Slide Parts Kit Includes:
The included upper parts kit has everything needed to complete slide assembly: firing pin and spring, firing pin safety and spring, extractor and depressor plunger with spring, channel liner, spacer sleeve, steel cover plate, and a polymer guide rod assembly (rod, washer, screw, spring).
- Firing pin
- Firing pin spring
- Firing pin spring cup
- Firing pin safety
- Firing pin safety spring
- 9mm Extractor
- Extractor depressor plunger
- Extractor depressor plunger spring
- Channel liner
- Spacer Sleeve
- Steel cover plate
- Polymer guide rod (guide rod, washer, screw)
- Guide rod spring
Slide Kit Instructions
Assembling your custom GLOCK® slide takes 15 to 30 minutes, and requires a few basic tools:
- Channel Liner Tool
- Small Punch Set
- Gunsmith Hammer
Need help? Use our instructional guide to put your slide together!
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Gun Builders Depot, a/k/a GunBuilders.com nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
WARNING: Handling firearms parts and accessories can expose you to lead and other petroleum products known to the State of California to cause cancer and reproductive harm. For more information go to: www.P65Warnings.ca.gov
Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or "assault weapons" (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily.
GunBuilders.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.
