Glock® 17 Compatible Pistol Build Kit - LFA Elite RMR Optic Cut Slide - FDE Cerakote

Full-Size Build Kit in FDE — Forged Slide, Frame Not Included

Already have a stripped G17-compatible frame? This kit rounds it out with a forged, RMR optic-ready slide in Flat Dark Earth, a barrel of your choice, and both parts kits, so assembly is all that's left before you're at the range.

Top ports and side vents cut weight from the forged 416R stainless slide, while front and rear serrations make it easier to rack and handle. The FDE Cerakote finish stands up to the fouling, wear, and corrosion that come with heavy use. Pick a non-threaded barrel for a standard build, or go threaded with a thread protector if a muzzle device or suppressor is in your future — both are 416R stainless with a Black Nitride finish and a 1:10 twist.

What's Included:

Slide

Step up from a standard OEM-spec slide with this forged 416R stainless slide, built for builders who want a lighter, faster-cycling upper without sacrificing durability. The forged construction shaves weight while keeping the slide tough enough to handle heavy round counts.

• Caliber: 9mm
• Compatibility: GLOCK® 17 Gen 1-3
• Fit: Factory GLOCK® 17 Internal Dimensions
• Material: 416R Stainless Steel, Forged & Heat Treated 38–42 HRC
• Finish: Elite Series FDE Cerakote
• Serrations: Angled Front and Rear
• Sight Cut: Standard Dovetail
• Optic Cut: RMR pattern
• 100% Made in the USA

Barrel:

Choose a non-threaded barrel for a standard build, or go threaded with a thread protector if you plan to add a muzzle device or suppressor down the road. Barrels are 416R stainless with a Black Nitride finish and a 1:10 twist rate, built for consistent accuracy shot after shot.

• Caliber: 9mm
• Material: 416R Stainless
• Finish: Black Nitride
• Twist Rate: 1:10
• Choose your barrel: Non-Threaded or Threaded w/ Thread Protector

Slide Parts Kit Includes:

The included upper parts kit has everything needed to complete slide assembly: firing pin and spring, firing pin safety and spring, extractor and depressor plunger with spring, channel liner, spacer sleeve, steel cover plate, and a polymer guide rod assembly (rod, washer, screw, spring).

• Firing pin
• Firing pin spring
• Firing pin spring cup
• Firing pin safety
• Firing pin safety spring
• 9mm Extractor
• Extractor depressor plunger
• Extractor depressor plunger spring
• Channel liner
• Spacer Sleeve
• Steel cover plate
• Polymer guide rod (guide rod, washer, screw)
• Guide rod spring

Frame Parts Kit Includes:

• Connector
• Slide Stop Release with Spring
• Locking Block Pin
• Magazine Release
• Magazine Release Spring
• Slide Lock
• Slide Lock Spring
• Trigger Housing Pin
• Trigger Housing with Ejector
• Trigger Pin
• Trigger Spring
• Trigger with Trigger Bar

This kit is not a firearm. This Glock® build kit includes a slide, barrel, operating rod with spring, slide parts kit, and frame parts kit. This kit does not include a frame.

Sold Separately:

• Stripped Frame
• Magazine
• Red Dot Sights
• Iron Sights

Need Help Assembling The Slide in This Kit?

Use our instructional guide to put your slide and parts kit together!

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Gun Builders Depot, a/k/a GunBuilders.com or this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.